Kokopelli Packraft Rogue-Lite

 

RRP: £859.99
FROM: £793.34 (£661.12 ex VAT)

 

Thanks for your interest in the . We're sorry we're unable to fulfil an order at this time but if you'd like to be notified when stock is next available please let us know:

Product:

Quantity *:

Email *:

Phone:

Notify Me

Discount Code

If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.

For more information on discount codes, click here.

Lightweight Packraft

The Kokopelli Packraft Rogue-Lite is part of the Adventure Series and is "the" minimalist packraft. It weighs as little as 2.3kgs and packs down to the size of a paper towel roll, the image of it next to a Nalgene bottle is realistic. Rated up to Class I rivers, it uses super durable 210d DuPontTM Kevlar® Aramid-Nylon Blend for the reinforced floor system. It's ideal for use on lakes, oceans, flat water and calm rivers and for backpacking, adventure-travel, high-alpine fishing and bikepacking. With improved robustness for this 2020 version with both the external D-Rings and compression straps beefed up to 1in (2.5cm) Mil-Spec Webbing.

If you don’t want to choose which mode of adventure-transportation gets left at home, the ultra-lite and durable Rogue-lite is your packraft. Light enough and strong enough to go anywhere,  the versatility of the Rogue-lite makes it perfect for all of your outdoor adventures.





.

The Kokopelli Rogue-lite packraft has a moderate trim, a slight rocker on the bow, and a large-volume stern which gives it great Flat Water to Class 1 river handling capability and stability. With extra-large 30cm diameter pontoons and a higher floor-to-sidewall attachment point this bucket style packraft minimizes weight and bulk, shortens setup time and makes getting in and out of it straightforward. Paddling comfort is achieved by leaning back against the stern of the boat.

For durability and protection alongside the 210d TPU-Nylon sidewalls and proprietary 210d  DuPontTM Kevlar® Aramid-Nylon Blend* floor system, the seams are first stitched and then welded with double-reinforced 1in (2.5cm) wide seam tape. Additionally, the pontoon-to-floor attachment point is glued to the sidewall and then reinforced with v-seam tape around the entire interior of the packraft.

The inflatable seat is made from 210d Diamond-Ripstop Nylon and uses a Stem Valve. This helps to keep you comfortable and improves paddling position which allows for deeper, more efficient paddle strokes.

The Rogue-lite features a Leafield D7 valve - the most durable valve on the planet, made from roto-molded plastic and is threaded and screwed together, not welded or glued. Meaning your valve will never come un-welded or fall apart. Inflation is by the included Inflation Tube and Inflation Bag and there are four strategically placed D-Rings on the front of the packraft.

TiZip Version

If you think you will need more storage space the TiZip version has an airtight, watertight zip that provides access to the inside of your packraft pontoon. Lightly lubricate your TiZip zipper with the included silicon lubricant after every single use .

Care

Always rinse your packraft off with clean water once you are off the water. Be sure to clean out any debris that may have accumulated in the seams of your packraft. Focus on where the pontoons meet the floor or spraydeck especially. Allow to dry fully. Store loosely rolled in a climate controlled, UV-free environment to extend the life as much as possible. A small amount of a friendly detergent can be added to the water.

  • Recommended Use: Lakes, Oceans, Flat Water, Calm Rivers - Grade 1.
  • Air Chambers: Main Pontoon
  • Stern Type: High Volume
  • D-Rings: 4 Front/External 2.5cm Mil-Spec Webbing
  • TiZip (on TiZip version only) 53cm long with full pontoon access
  • Packsize: 13 x 8in
  • Packraft Weight: 2.4kg
  • Inflatable Seat Weight: 0.23kg
  • Inflation Bag Weight: 0.09kg
  • Inflation Tube: 0.06kg
  • Compression Straps: Set of 2 weighing 0.03kg each
  • TiZip (on TiZip version only) weight: 0.9kg
  • Load Capacity: 136kg
  • Sidewall Fabric: 210d TPU-Nylon
  • Floor Fabric: 210d DuPont Kevlar Aramid-Nylon Blend
  • Valve Type's: Packraft - Leafield D7, Inflatable Seat: Stem
  • Recommended Pressure: Packraft and Inflatable Seat: 1.5 PSI
  • Outer Length:215.9cm
  • Inner Length: 129.5cm
  • Outer Width: 94cm
  • Inner Width: 39.4cm
  • Front Rocker: Ground to Bottom: 2.5cm, Ground to Top: 45.7cm
  • Rear Rocker: Ground to Bottom: 0cm,Ground to Top: 45.7cm
  • Tube Diamater: 30cm
  • Included in the box:
  • Rogue-lite
  • Inflatable Seat
  • Inflation Bag
  • Inflation Tube
  • 2 x 2.5cm Mil-Spec Webbing Compression Straps
  • Emergency Repair Kit
  • Tizip Lubricant (included in Tizip version only)
  • Warranty: Packraft - 3 year, TiZip (Tizip version only): 1 year

Up and Under WATERSPORTS BLOG

Environmental Responsibility

As an outdoor retailer we're aware that our business relies on the manufacturing, transportation and consumption of gear and related products. In an attempt to reduce our environmental impact, we're making a concious effort to implement sustainable change throughout the business. See what our store is doing and what some of the brands we carry are doing to make a difference.
More on Environmental Responsibility »

Sweet Promotion

Temporary overstock promotion on Sweet Protection helmets, get in quick before they go back to normal price! Sweet helmet sale includes Sweet Rocker, Rocker Fullface, Sweet Strutter and Sweet Wanderer with savings between 19 and 26% off RRP.
More on Sweet Promotion »

Sweet Protection - The Iconic Logo!

Sweet Protection has had a classic logo since the launch of the Strutter all that time ago back in 1997. The Sweet Kayak helmet brand is well known for that big shiny "S". Sadly, this year it is going to change.
More on Sweet Protection - The Iconic Logo! »

Please wait!