Products tagged with 'alloy'

The DMM Spectre is an all-round carabiner for versatility and can be used across trad, sport, or winter climbing. They are full sized for ease of handling, while I-Beam construction and wire gates keep weight low. If you want one type of carabiner to cover all your climbing needs, you need an all-rounder. Wire gates are the lightest gate type available, and resist freezing shut in cold conditions. They are crucial in reducing the weight of your rack, and are ideal for trad, winter, and alpine climbing.

The Zodiac 12mm Keylock is DMM's flagship rigging karabiner. It's extremely strong and therefore suited to heavy use situations like heavy duty rigging, rescue loads and group instruction, where toughness and strength are key. The clean nose gate uses DMM's patented Taperlock design and their toughest barrel to give very strong gate open and side face strengths.

The Petzl Attache is a lightweight and compact, pear-shaped karabiner with as screw gate opening. It has multiple uses for belaying, such as connecting a belay system to a harness and belaying with a Munter hitch. It has a H-cross section to reduce weight, as well as the keylock system to avoid the karabiner snagging during manoeuvres.

The OCUN Condor HMS is a large karabiner that responds to the new trends of safety. Equipped with an independent internal wire gate that prevents it from rotating and guards against unwanted release from a belay loop, this karabiner ensures safe belaying and rappelling. The internal gate locks in the right direction and therefore prevents upward release. This means that the belayer can focus their full attention on the climber. The Condor brings a new level of safety into belaying.

The Petzl Sm'D represents a D-shaped carabiner with a locking mechanism, known for its lightweight and compact design. It finds utility across various scenarios, offering ease of handling even with gloves, and comes in two different locking system variations.

The Petzl Rollclip Z is a carabiner with an integrated pulley for reducing friction and redirecting rope. The Z specific model has a gate which opens on the non-pulley side of the carabiner, to allow for easier installation onto anchors and other devices.

The Petzl Rollclip A is a carabiner with an integrated pulley to reduce friction and redirect the rope. With the A version of the Rollclip the gate opening is on the pulley side to facilitate installation of the rope when the pulley is fixed to the anchor or device.

The Petzl Eashook Open carabiner has a gated attachment point for lanyards or slings, making it possible to reuse the connector when the lanyard is damaged.