Products tagged with 'beal'

The Beal Air-Port 4 Docking Point Multiplier can accommodate up to four carabiners simultaneously. It has 20mm holes for easy turning, especially for those with a locking barrels. To ensure their traceability, each multiplier has a unique identification number. "

The Beal Air-Port 8 Docking Point Multiplier can accommodate up to eight carabiners simultaneously. It has 20mm holes for easy turning, especially for those with a locking barrels. To ensure their traceability, each multiplier has a unique identification number.

The Beal Twist'Air B Pulley is a Compact aluminium swivel with ball bearings to optimise performance even when loaded. It has a ball bearing for efficient operation even under load and has an individual number which guarantees its traceability.

The Beal Super Leash is part of the Beal Work Station range. It’s an extendable tool tether which helps prevent dropped objects, particularly tools, whilst working at height. The bungee lanyard saves space when not in use but can extend up to 1.15m when you pull it. If used properly, the drop risk can be eliminated, as the tool always remains attached to something.

The Beal DynaConnexion is a dynamic rope sling with sewn endings for use in big wall climbing and mountaineering. It has been developed by André Laperriere of the Mountain and Rock Climbing Federation of Quebec, it has a breaking load 22 kN and its seams are protected by a thermo-retractable sheath. The DynaConnexion is perfect for use on long routes or in mountaineering to shortlink into the belay, to facilitate rappelling or to extend a runner whilst climbing.

The Beal Pinch has been designed to help secure a karabiner in position at the end or a rope or tape lanyard, and constructed of tough, abrasion resistant material to provide protection against rock and concrete.

The Beal DynaDoubleclip is a double dynamic rope lanyard with sewn endings for belaying and rappelling during big wall climbing and mountaineering. For added safety and durability, its seams are protected by a moulded sheath. It is lightweight, compact and is great for facilitating manoeuvres when rappelling, climbing or mountaineering.

The Beal Dynapark Y-Safety Lanyard consists of two strands of rope that are each 80cm long and made of dynamic rope with sewn-on endings. It is therefore much safer than static lanyards with a strength of 1500daN. For added safety, the karabiners can be attached to the lanyard with the Pinch attachment. To facilitate inspections, each lanyard has a unique identification number and can be fitted with an RFID chip.