Rigging Hub

The Petzl Paw Plates are rigging plates for organizing the belay and creating a system with multiple anchors. Useful in big wall climbing and for setting up Tyrolean traverses. Paw Plates can also help to equalize loads and provide an excellent strength to weight ration. The small Paw Plate has 4 holes, the medium has 8 holes and the large Paw Plate has 14. All holes are 19mm so the locking sleeves of most carabiners can pass through.

The Petzl Swivel is a sealed ball bearing swivel for suspending loads. It prevents twisting your rigging when the load rotates and the sealed ball bearings offer excellent performance and reliability. The small size is designed for 1 person, the large for 2 people.

These Circular Slings are made using a 25mm polyester superweb and have a tensile strength of 35kN which exceeds the standard set by EN354 of 22kN. A multi-use sling, can be used for belays, attachments, foot loops, etc.

The Petzl Coeur is a multi-directional bolt hanger designed for use in sport climbing, multi-pitch climbing and is also good for canyoning.  It is manufactured in three materials; Steel, Stainless Steel (316L) and HCR (High Corrosion Resistant) Stainless Steel (904).  The steel and stainless steel hangers are both available in 10mm or 12mm hole diameters.

The SAR Products Twin Eye slings are made with a 18mm polyester superweb, and are rated to 24kN. This exceeds the standard set by EN354 of 22kN. 10cm & 20cm Twin Eye slings are used with the Rocker or as a short link lanyard in rope access.

The SAR Products 18mm Circular Sling are made using a 18mm polyester superweb and have a tensile strength of 24kN which exceeds the standard set by EN354 of 22kN. A multi-use sling, can be used for belays, attachments, foot loops, etc.

The DMM Revolver Rig is a connector with an integrated pulley sheave. Featuring a high efficiency roller bearing sheave(s), a threaded removable captive bar and a full strength textile friendly becket. The uniquely profiled spine and captive bar aid in maintaining correct orientation. The design of the Revolver Rig is such that when using a connector attached to the becket, any friction between the connector and rope is minimised.