Fuse

The Petzl ASAP is a mobile fall arrest device with a unique locking system, an essential for anyone working at height. The ASAP will follow the user along the rope without any manual intervention, and in the event of sudden acceleration the ASAP will lock on the rope and stop the user. The ASAP is easily attachable and removable making it simple but effective for users.

The Petzl ASAP Lock is a mobile fall arrest device with the added function of a lock. The lock allows the user to immobilize the device to reduce the length of a fall. As with the Petzl ASAP, the ASAP Lock locks on the rope when it is shock loaded, stopping the user from falling any further. The connection arm makes the system loss-resistant when passing intermediate anchors. Please note, the ASAP LOCK must be used with an energy absorbing lanyard to work at a distance from the rope.

The Petzl ASAP'Sorber works in conjunction with the Petzl ASAP or ASAP Lock, it's designed to rip along the stitching during a fall. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. It is available in two lengths, to provide the best balance between distance from the rope and reduced fall length.

The S.Tec Duck-R is a back-up device in the style of the Petzl Shunt but in this case it works only on one rope and has been certified for use in work at height scenarios rather than as descent back-up when climbing or caving.

The SafeTec ENForcer-H is a non-aggressive device and during correct operational use it will not damage ropes. In emergency deployment with the exception of very minor glazing a properly used EN Forcer will lock on to the Back-Up rope without causing serious damage to itself, its lanyard, karabiners or to the rope.

The Beal Monitor fall arrester has a swivelling side plate for ease of installation on the rope and to limit wear and tear. A lateral brake converts the Monitor into a rope clamp for work positioning. It can also easily follow the operator both up and down and lock in the event of a fall.

Spare pouch for ASAP'Sorber Axess.

The ISC Rocker can be fitted to the rope at any point and can be used hands-free as a self-tailing device when travelling up or down the rope. The Rocker is designed for use without a shock-absorber and can be used as a Rope Adjuster or on a work positioning lanyard/Flipline, (In accordance with EN358).