The Raumer Tap features a sophisticated design that guarantees perfect anchorage to the rock. It has very strong and tough teeth, so it is not necessary to use another Tap to complete the hole. These self-drilling anchors are used with the Stroker to manually drill a hole. Made with galvanized steel.

The Raumer Stroker Bolt Driver is a manual bolt driver made entirely from tempered and polished stainless steel.

The Raumer Action - CrMo Hammer has two size 13 external hex drivers : one on the end of the handle and one set on the head. The handle’s base is fitted with a hex socket (size 13) and houses an innovative small spring-operated ejector piston for removing mud. Rubber coats the stainless steel shaft with 3mm cord (1.5m long) to secure it.

The Raumer M10 / M8 Adaptor is for self-drilling bolts (type SPITROC M8 – not in catalogue) and stainless steel RAINOX M8 (art. 130). Made with a stainless steel core and a case-hardened galvanised steel hexagonal body.

The Thule AcuTight Knob is designed to replace the standard tightening knob of the Thule's range of rear mounted bike carriers. The Acutight Knob is a  Torque Limiter, which clicks and limits how tight the bike rack can grip the bike's frame, preventing overtightening (and under tightening if you take it to the limit).

The Thule Bike Frame Adapter is designed to fit on non standard bike frames (Ladies Frames, Carbon Bikes, etc) to allow them to be used on with roof racks that the bike otherwise would not fit.

XXL Fatbike Wheel Straps are a set of extra-long replacement wheel straps to enable transport of very large fat bikes.Fits Thule EasyFold XT and Thule VeloSpace XT bike racks.

The Thule VeloCompact 4th Bike Adapter lets you add one more bike to your Thule VeloCompact 3-bike carrier (926/927) to transform it into a 4-cycle carrier.

The Thule Easyfold XT Loading Ramp is an accessory for Thule's Easyfold XT rear mounted bike rack range. It fits to an Easyfold XT rack and allows you to load your bike by rolling it up onto the rack, saving you having to lift and place the bike onto the rack. When not in use, the Loading Ramp folds up into a compact size, and can be stored on the Easyfold XT Bike Rack until needed.

The Thule Wheel Strap Locks are a locking kit to lock the bike rack’s wheel straps for extra theft protection.

The Petzl Dual Connect Adjust lanyard is a double positioning lanyard with one fixed arm and one adjustable arm. The adjustable arm can be set to length for rappel maneuvers, on multi-pitch routes, in mountaineering, or when moving along a fixed line. This is a single device that replaces the need to have two separate slings, so can be used for a variety of different scenarios while playing in the mountains.

The Petzl Evolv Adjust is a positioning device with two arms allowing you to progress from one point to another, making it ideal for activities like aid climbing. The length of the arms goes from 15 to 150 cm allowing a huge reach, and the rubber ring holds the carabiner making clipping quick and hassle free.

The Beal Aramide Cord 5.5mm is a must in any caver's arsenal. Durable and versatile, the 5.5mm cord can be used to help in almost any situation in the caves. The aramid core of this cord makes it both static and very strong. Minimal stretch and maximum durability!

The Leatherman Charge + is a multi-tool that's been created for use on everyday adventures, featuring crucial tools that can all be opened and locking with just one hand. Every tool on the ultra-useful Charge Plus makes it adventure-worthy. The scissors will slice through anything, the wire cutters are made in a durable material and are replaceable once worn out, the knife blade is made using a strong, corrosion-resistant 154CM steel. Need an extra hand? No problem.

The 3/4 Trail Raider Women is a mixture between women's shorts and running tights. Shorter than traditional tights, it gives you a real second skin feeling thanks to its soft and ultra stretch polyester and elastane fabric. The multi-pocket belt has a zipped pocket in the back and two large mesh pockets on the sides.

The Black Diamond ATC-Alpine Guide is a slimmer, more compact and lighter version of BD's iconic ATC-Guide, the ATC-Alpine Guide is built for quick ascents in the mountains. This belay device is optimised for ropes between 8.1mm and 8.5mm yet works with ropes from 6.9mm to 9mm. The anchor-hole allows for easy feeding and pulling of rope, and the device's guide mode lets you belay one or two seconding climbers off any anchor.