Avao Bod

 The AVAO BOD harness has a specific construction that allows the user to hang from the dorsal attachment point for a longer time in case of a fall.

Description
Comfortable throughout the workday:
- wide, semi-rigid waistbelt and leg loops for excellent support. Its lightweight, breathable construction maximizes air flow
- foam shoulder straps are widely spaced to reduce neck chafing. When the waistbelt is loaded, they help distribute the load over the shoulders
Convenient adjustment:
- waistbelt, shoulder straps and leg loops equipped with self-locking DOUBLEBACK buckles for quick and easy adjustment
- stowage system for the MGO connectors on fall arrest lanyards, on each shoulder strap, allows the user to be unhindered by the lanyard and keep the connectors within reach. In case of a fall, this system releases the MGO connectors and allows the absorber to be deployed
- side attachment points can be folded down to prevent them snagging accidentally when not in use
- DOUBLEBACK self-locking buckles at the rear of the harness, between the waistbelt and the leg loops, allow for an adjustment for use on the dorsal attachment point. In case of a fall on this point, a shorter adjustment allows the weight to be taken up on the leg loops so that the user may remain more comfortably suspended while awaiting rescue
Facilitates carrying and organization of tools:
- six pre-shaped equipment loops with protective sheath
- two slots for CARITOOL tool holder
- four slots for TOOLBAG tool pouch
The international version has a fall indicator: a red strap appears on the dorsal attachment point after a fall to indicate that the harness should be retired

Specifications
Ventral attachment point: attachment for a descender or a positioning lanyard for use in single mode
Lateral attachment points: attachment for a positioning lanyard for use in double mode
Sternal attachment point: fall arrest system attachment
Dorsal attachment point: fall arrest system attachment
Rear attachment point on the waistbelt: restraint lanyard attachment
Material(s): nylon, polyester, aluminum, steel

References & Certifications:
European version:
Certification(s): CE EN 361, CE EN 358, CE EN 813, UKCA, EAC

International version:
Certification(s): ANSI Z359.11, NFPA 1983 classe III, CSA Z259.10, CE EN 361, CE EN 358, CE EN 813, UKCA