Professional

The Beal Transf'air 2B is a highly efficient double pulley with ball bearing mounted sheaves, the swivelling action of the side plates allows the pulley to be positioned anywhere along the rope. Ideal for intensive use with large diameters ropes.

The Transf'air 1 pulley is a pulley designed for load deflection and hauling. Single pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope. The good performance is ensured by a sheave mounted on a bronze ring. Its durability is reinforced by a stainless steel shaft and washer. And to ensure traceability, each pulley has an individual number.

The Beal Transf'air Fixe B is a pulley with fixed side plates and ball bearings for optimal efficiency. Its compact and lightweight nature make it easy to handle. Allows a pulley system to be set up by adding a component such as an ascender.

The Beal Transf'air 1B pulley is designed for load deflection and hauling. Single pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope.

The Beal Transf'air 2B pulley is a pulley designed for load deflection and hauling. Twin pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope.

The Petzl MGO Open is a wide opening connecter for securing to larger diameter bars and cables. The auto locking mechanism makes using the MGO Open easy and convenient when crossing between structures and fixed attachments.

The Croll Strap enables the Petzl Croll chest ascender to be used effectively in conjunction with a wide range of Petzl professional work at height harnesses. It allows the top of the Croll to be held in an upright position, close to the body, enabling the rope to run smoothly through the device thereby reducing 'lost' movement.

The Beal Pro Rescue 60 is a bag designed for rescue operations with a 60m and 12.5mm rope and all the basic equipment. A webbing sling under the bag allows it to be guided from below if needed. In addition, a flap with a clear interior pouch lets you check the equipment.

The Beal Flat Link has been designed to go with the Hold Up harness and is a fully rated karabiner, making it ideal for full body harnesses. The flat surfaces ensure an even load distribution on webbing.

Designed to protect items inside the Genuis Bucket Plus from bad weather, dust etc.Fitted using clips. Can be used with the Genuis Bucket Plus (also stocked on this website), and designed to protect the contents of the bucket from rain, sleet, other bad weather, dust etc... Also works well to keep the items held within the bag when transporting or hauling.

The Beal Hold Up has an offset mounting hole offset at a 90° angle. This allows the rope clamp to remain vertical and flat for excellent fluidity during ascent. In addition, the low attachment on the harness increases the amplitude of each movement. And for even more comfort, the opening of the cam is facilitated by an ergonomic remote lever.

The Beal Air-Port 8 Docking Point Multiplier can accommodate up to eight carabiners simultaneously. It has 20mm holes for easy turning, especially for those with a locking barrels. To ensure their traceability, each multiplier has a unique identification number.

The Beal Attac'Tool allows for ferrous tools to be handily placed on the magnet for easy, quick access. Too be used in conjunction with leashes for tools as dropping of the tools is still a risk. The magnet can be placed in many different places such as on a chest harness or on the leg loops of the harness. The magnet is able to hold a tool weighing up to 188g.

The Beal Super Leash is part of the Beal Work Station range. It’s an extendable tool tether which helps prevent dropped objects, particularly tools, whilst working at height. The bungee lanyard saves space when not in use but can extend up to 1.15m when you pull it. If used properly, the drop risk can be eliminated, as the tool always remains attached to something.

The Beal Twist'Air B Pulley is a Compact aluminium swivel with ball bearings to optimise performance even when loaded. It has a ball bearing for efficient operation even under load and has an individual number which guarantees its traceability.

The air-step is designed to be easily adjustable even whilst wearing gloves thanks to its large buckle. Placing of the foot into the step is also facilitated by a stiffer bottom of the loop to hold its shape. The foot loop also has an on/off adjustment meaning that it will tighten up to the foot when in the on position, then in the off position the users foot is free to come out of the loop.