Rigging and Anchors

The ISC ZipSpeed-S Trolley is an affordable pulley with a mid-sized trolley that uses state of the art engineering techniques to ensure that the trolley will run and run! These Tandems are fitted with rubber sealed, deep groove bearings for optimal performance and a lifespan of several thousand miles/km. The side plates are made from Aerospace Grade 7075 Aluminium, to minimise flex.

Used with an ascension ascender (also sold on our website) for handled rope ascents. Made of 100% Dyneema for increased durability and ease of use. Simply step into the elastic loop with your foot for use, great with any type of shoe. Plate for adjusting foot loop length.

Everyone's favourite Pulley! The DMM Hitch Climber Triple Attachment Pulley forms an integral part of the renowned Hitch Climber System and is a firm favourite of working at height professionals the world over. The three hole construction makes rigging and organising much simpler and allows for off-centre hanging to minimise rope to pulley friction.

With hardly a straight line in sight, the hot forged curves and fairlead flares of DMM's Pinto Pulley make for an ultra efficient, ‘textile friendly’ environment. Clip, hitch, splice or thread the anchor holes or the becket to give numerous work and rescue configurations (textile attachments can help minimise any torsional build up in closed systems).

The DMM Pinto Spacer is an essential component for Pinto Pulley applications where textile connecting elements tend to compress the side plates.

Slightly larger than the Pinto and accommodating a larger rope size, the DMM Pinto Rig also has a high efficiency roller bearing giving ultra smooth operation. With hardly a straight line in sight, the hot forged curves make for a ‘textile friendly’ environment.

The DMM Pinto Rig Spacer is an essential component for Pinto Rig applications where textile connecting elements tend to compress the side plates.

The Beal Pinch has been designed to help secure a karabiner in position at the end or a rope or tape lanyard, and constructed of tough, abrasion resistant material to provide protection against rock and concrete.

The Petzl Kootenay has a large diameter sheave on sealed ball bearings, providing good efficiency and rope care, and the high volume rope channel allows knots to pass through. The Kootenay also has the ability to be used as an anchor thanks the locking pins on the sheave.

The Singing Rock Redblock is a fixed sheave shear reduction device.  It is suitable for top rope belaying with textile EN892 / EN1891 rope up to 12mm diameter. The unit has a stainless steel fixed sheave (60mm diameter) and pins + anodised aluminium alloy fixed side cheeks. This unit is suitable for top roping techniques in many applications including those found at climbing walls & adventure parks.

The Gemini double pulley features special side plates which are designed for use with a Prussik friction hitch in lightweight progress capture systems. Designed with parallel mounted sheaves and an auxiliary attachment point for creating different types of hauling systems, even the most complex and technical of hauling systems.

The Petzl Twin is a highly efficient double prussik pulley. This has special side plates for use with a prussik friction hitch. Large diameter sheave (51mm) mounted on ball bearings for low friction, high efficiency. The clipping slot is large enough to accept 3 typical karabiners.

This has special side plates for use with a prussik friction hitch. Large diameter sheave (51mm) mounted on ball bearings for low friction, high efficiency. The clipping slot is large enough to accept 3 typical karabiners. For use with 7 to 13mm ropes.

The Footape foot loop is designed for aid climbing, mountaineering and caving but is also suitable for multi-pitch climbing. The Footape is intended to be used with the Ascension or Basic ascenders. A mini DoubleBack buckle allows for quick and easy adjustment of the length of the foot loop. The foot loop is made of reinforced nylon webbing making it durable, comfortable and easy to use.

The Gradistep is a 5-step etrier which folds into a storage pouch. Stiffened loops make it easier to place your feet. Designed for aid climbing and multi-pitch climbing the Gradistep is also good for mountaineering.

The lightweight Mini Prussik pulley can handle big loads but is small enough to take almost anywhere or be carried on the harness. The Mini features special side plates which are designed for use with a Prussik friction hitch in lightweight progress capture systems. The aluminium sheave is mounted on sealed ball bearings which provides excellent efficiency.