Products tagged with 'rigging'

The DMM Pinto Rig Spacer is an essential component for Pinto Rig applications where textile connecting elements tend to compress the side plates.

The Beal Pinch has been designed to help secure a karabiner in position at the end or a rope or tape lanyard, and constructed of tough, abrasion resistant material to provide protection against rock and concrete.

The Petzl Kootenay has a large diameter sheave on sealed ball bearings, providing good efficiency and rope care, and the high volume rope channel allows knots to pass through. The Kootenay also has the ability to be used as an anchor thanks the locking pins on the sheave.

The Gemini double pulley features special side plates which are designed for use with a Prussik friction hitch in lightweight progress capture systems. Designed with parallel mounted sheaves and an auxiliary attachment point for creating different types of hauling systems, even the most complex and technical of hauling systems.

This has special side plates for use with a prussik friction hitch. Large diameter sheave (51mm) mounted on ball bearings for low friction, high efficiency. The clipping slot is large enough to accept 3 typical karabiners. For use with 7 to 13mm ropes.

The Petzl Looping is a 4-step etrier designed for aid climbing and mountaineering but can also be used for multi-pitch climbing and caving. Wide, reinforced nylon webbing makes placing your feet easy while providing abrasion resistance.

The Petzl Ultralegere is one of lightest pulleys available at just 10g. The Ultralegere is s a simple nylon sheave that can be installed on a symmetrically shaped carabiner with ropes between 7 and 13mm.