Single

The Beal Transf'air 1B pulley is designed for load deflection and hauling. Single pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope.

The Beal Transf'air Fixe B is a pulley with fixed side plates and ball bearings for optimal efficiency. Its compact and lightweight nature make it easy to handle. Allows a pulley system to be set up by adding a component such as an ascender.

The Petzl Mobile is a compact and lightweight pulley for hauling systems and deviations. To increase efficiency the sheave is mounted on a self-lubricating bushing.

Everyone's favourite Pulley! The DMM Hitch Climber Triple Attachment Pulley forms an integral part of the renowned Hitch Climber System and is a firm favourite of working at height professionals the world over. The three hole construction makes rigging and organising much simpler and allows for off-centre hanging to minimise rope to pulley friction.

With hardly a straight line in sight, the hot forged curves and fairlead flares of DMM's Pinto Pulley make for an ultra efficient, ‘textile friendly’ environment. Clip, hitch, splice or thread the anchor holes or the becket to give numerous work and rescue configurations (textile attachments can help minimise any torsional build up in closed systems).

The DMM Pinto Spacer is an essential component for Pinto Pulley applications where textile connecting elements tend to compress the side plates.

Slightly larger than the Pinto and accommodating a larger rope size, the DMM Pinto Rig also has a high efficiency roller bearing giving ultra smooth operation. With hardly a straight line in sight, the hot forged curves make for a ‘textile friendly’ environment.

The DMM Pinto Rig Spacer is an essential component for Pinto Rig applications where textile connecting elements tend to compress the side plates.

The Petzl Kootenay has a large diameter sheave on sealed ball bearings, providing good efficiency and rope care, and the high volume rope channel allows knots to pass through. The Kootenay also has the ability to be used as an anchor thanks the locking pins on the sheave.

The lightweight Mini Prussik pulley can handle big loads but is small enough to take almost anywhere or be carried on the harness. The Mini features special side plates which are designed for use with a Prussik friction hitch in lightweight progress capture systems. The aluminium sheave is mounted on sealed ball bearings which provides excellent efficiency.

The Petzl Ultralegere is one of lightest pulleys available at just 10g. The Ultralegere is s a simple nylon sheave that can be installed on a symmetrically shaped carabiner with ropes between 7 and 13mm.

This has special side plates for use with a prussik friction hitch. Large diameter sheave (51mm) mounted on ball bearings for low friction, high efficiency. The clipping slot is large enough to accept 3 typical karabiners. For use with 7 to 13mm ropes.

The Fixe is a lightweight and compact pulley that is quick to install on the rope. Designed for use in hauling systems and deviations it offers a good balance between weight and strength. The Fixe has fixed side plates which allow for quick installation and coupling with a rope clamp. The 21mm aluminium sheave is mounted on self-lubricating bushings for greater efficiency.