Manufacturer:

Spiroll Rope Protector

The Spiroll Rope Protector employs a unique patent pending technology whereby the device’s rugged polyurethane material wraps snugly around a rope several times to secure itself in place. Spiroll Rope Protectors are easily placed anywhere on a rope and then positioned into the desired location.

The Spiroll Rope Protector will accommodate all rope sizes and will not slide down a rope (ropes >9.5mm; ropes with smaller diameters should be tied off with a small cord through the integrated punch hole on unit). Application takes less than 20 seconds.

Wrap this round your rope to secure in place- will protect your rope the most part from snags and abrasion giving it a longer life. Will not slide down so does not need to be tied off (generally different for rope less than 9.5mm as this diameter is small). Easy to use. Two or more overlapping Spiroll protectors can be used in tandem for expanded coverage.

**tie off with separate chord if necessary.
**Rope/anchor movement must be avoided.
**does not offer protection against crushing forces and rope/ anchor failure.
**do not place near hot surfaces or heat, harsh chemicals, and corrosive solvents.
**Please inspect your Spiroll protectors and rope after every use for ware. Replace Spiroll protectors if damaged or worn.  

Material: Polyurethane
Length: 23.5″ (59.7cm)
Weight: 2.2oz (57g)

Ultimate Tensile Strength: 10,000 PSI
Ultimate Elongation: 450%
Vicat Softening Point: 92º C

Discount Codes

If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.

Click here for more information on discount codes