Trad

The DMM Dragon Cams feature a single stem, dual axle design that provides 360° flexibility and a substantial expansion range that increases performance in sub-optimal placements, therefor helping you get the right piece first time. Their striking TripleGrip cam lobes feature an increased contact area with a raw aluminium finish and additional bite points. These features work together to increase friction between the cam lobe and the rock it's placed in, increasing holding power and reduces walking.

The DMM Pivot belay device delivers confident belaying and effective stopping power whether used in guide mode, or belaying from the waist. Guide plates have traditionally been difficult to operate when lowering seconds. The Pivot's shackle reduces the force needed to initiate lowering, increasing control of the speed at which you lower your second.

The DMM Phantom Quickdraws (6 pack) feature an I-Beam construction that brings each Phantom carabiner's weight down to just 28 grams. Low weight doesn't mean no frills: the Phantom has a reduced gate notch to combat snagging, and more metal in contact areas for reduced wear on equipment.

The DMM Peenut are small offset nuts (available individually or as a 1 to 5 set) are specifically designed for flared cracks and shallow placements, but seem to fit everywhere. Found to be particularly effective on Cornish Granite. Now colour-coded for quick identification.

The DMM Offset Nuts are made with anodised alloy and are available individually as a size 7-11 set. These are bigger and more rounded than their brass brothers. Based on the famed HB design this anodised alloy offset set gets you placement where no other nut can because of their complex offset shape. Especially useful on granite cracks and colour coded for easy selection off the harness.

The DMM Nylon 26mm Open Slings are very strong and durable nylon slings ideal for centre use. These are the strongest tape in DMM's range, rated at a massive 32kN. When strength and longevity are paramount these are the ones.

The DMM Nylon 16mm Open Slings are wider and heavier than the Dynatec slings and are a great option for beginners or use in outdoor activity centres. Although they are rated no higher than dyneema slings, there is more material involved and so they offer a greater safety margin when dragged over a sharp edge. The extra width may give beginners more confidence too.

The DMM Nutbuster is an invaluable tool for retrieving jammed gear. It features a rubber handle that gives a firm grip that lets you bash the Nutbuster to remove stuck protection. It can also be removed to reveal a 17mm spanner that lets you tighten loose bolts. The Nutbuster is laser cut from stainless steel for strength and corrosion resistance, with holes cut into it to minimise weight. A versatile and functional tool that every trad climber should carry.

The DMM Micro Wallnuts are for use in extremely narrow cracks where a normal Wallnut size 1 is too big. The large contact surface area of the Micro Wallnuts allows them to spread loads over a greater area of rock, decreasing the chance of the rock failing. They feature straight sides to give alternative placement options to our other alloy micro-protection. Used in conjunction with Peenuts they provide comprehensive protection for small cracks in friable rock.

The DMM IMP Brass Nuts are invaluable for those pushing into harder grades and need to take advantage of all protection options. The brass alloy used in their construction means that the nuts lock into the rock incredibly well, whilst also resisting being pulled through the placement. These are soldered directly on to wires, allowing a thicker wire to be used and increasing the strength of the IMP. The swage on the wire is colour coded for quick size selection, and allows one side of the wire to slide, letting the IMP self equalize when loaded and increasing placement security.

The DMM Torque Nuts are designed to work in a similar fashion to Rockcentrics meaning they can be placed passively at a constriction or cammed into place in parallel cracks thanks to their offset edges. Additionally they are racked on extendable dyneema allowing the nuts to be neatly stowed on your harness and then extended when placed, eliminating then need for extra quickdraws. Four sizes are available covering a very wide range of large cracks.

The DMM Spectre Quickdraw is a great choice for climbers looking to build their first rack. It uses two full-sized karabiners for ease of handling, with a small gate notch for reduced snagging and I-Beam construction to reduce weight. The karabiners are linked by a lightweight 11mm Dynatec Dyneema sling, making this the perfect starter quickdraw that's suitable for all styles of climbing.

The DMM Spectre Quickdraw is a great choice for climbers looking to build their first rack. It uses two full-sized karabiners for ease of handling, with a small gate notch for reduced snagging and I-Beam construction to reduce weight. The karabiners are linked by a lightweight 11mm Dynatec Dyneema sling, making this the perfect starter quickdraw that's suitable for all styles of climbing.

The DMM XSRE karabiners are compact and lightweight climbing accessories that haven been designed to provide maximum functionality without compromising on strength. With its sleek design and reliable performance, this karabiner is an excellent choice for climbers who prioritise weight savings and efficiency.

The Edelrid Aramid Cord Sling 6mm is a sewn sling made with high-strength aramid. Aramid delivers a significantly higher breaking strength than other conventional slings.

The Edelrid Tech Web Sling 12mm is strong, lightweight and durable. It has a high-strength Dyneema® core to keep weight to a minimum, that is wrapped in a light nylon sheath to provide abrasion protection for the core and improved grip.