The Boreal Joker Lace is a classic Boreal shoe, and an ideal choice for all-day climbing. The semi-asymmetric last with a slim fitting heel and low tension rand gives enough precision for the difficult moves you may encounter on long routes whilst not being stressful for your feet. The full length lace-up closure system ensures a snug fit and the Air Net lining makes these shoes breathable and comfortable.

The Boreal Laces Mountain (Flat) are flat nylon laces, available in 200cm and 180cm long, suitable for B2 and b3 boots.

The Boreal Ninja Junior is one of the best climbing shoes out there for people with little feet. It is easy to get on and off with a Velcro tab closure system combined with an elasticated heel which also gives a bit more room for growth.

The Boreal Satori is a climbing shoe built on a highly downturned and asymmetric last, with a soft midsole for high levels of sensitivity and technical ability. Painstakingly tested and developed by world class climbers and drawing on Boreal’s unparalleled 45+ years at the cutting edge of rock shoe design, the Satori is their most advanced performance shoe yet. With massive coverage of sticky rubber over the toes and forefoot, Boreal's phenomenally grippy proprietary Zenith Ultra 2.0 rubber and incredible heel hold, the Satori is perfectly at home on the steepest and most extreme moves.

The Boreal Ninja Junior Vent is a comfortable, reliable and versatile kids climbing shoe which will adapt to growing feet, ensuring maximum wear time. Its fit and features are identical to the standard version however, the upper of this shoe features a breathable 'vent' material which is better suited to hot indoor sessions or outdoor climbs in the summer months.

The Crux 3G AK37 RT is an incredibly tough, yet lightweight rucksack made from a 40% Kevlar® and 60% Cordura® composition with a minimalist waterproof design. So you don't need an extra waterproof bag liner which adds weight and annoyance. With very few seams and composed with 40% Kevlar, this pack is likely to last you for ages and will thrive where most normal rucksacks will perish.

The Crux AK47 RT is a super-tough rucksack that utilises a Kevlar-based fabric construction whilst weighing in at just under 1.2kg. This means it's it's built to withstand the knocks and scrapes of demanding climbs, but it won't slow you down. Hence the Crux 3G AK47 RT is a must have pack for the discerning Alpinist.

The AK70 is a large expedition pack suitable for climbs in the Greater Ranges. It can manage a heavy payload of 28–35 kgs in tolerable comfort, but still remains light enough to be used for a summit push. Its large volume is ideal for stuffing bulky, frozen gear into. As well as being remarkably light for such a capacious pack, the AK70 is substantial enough to impart a feeling of solidity and security.

The Crux 3G AK57 RT takes the classic AK57 and gives it a fully waterproof body using welded seams, Kevlar fabric and a roll-top closure. The extendable floating lid allows an extra 5 litres space to put ropes etc when quick access may be necessary or your kit is frozen stiff and won't go back in your pack.

The Crux 3G AK47-X RT has most of the same great features as the Crux 3G AK47 RT, but with an added floating removable lid and a roll top closure under the hood. Perfect for when you have to huff in huge loads to a camp and then need to strip the sack back down to minimise weight - or when you want to ditch the lid but still have a waterproof rucksack without need for a liner.

The DMM Apex is an ice tool with a new and modern design that make it perfect for ice and winter climbing in anywhere from Norway to Scotland. The shaft features an extreme curve, which provides good hand clearance in ice bulges and allows for a technical pick angle. The grip is insulated and ergonomically shaped for maximum comfort and control. All of its components are T-rated and subsequently suitable for belay anchoring.

The DMM Brass Offsets are a crucial tool for protecting small flared cracks, they often fit perfectly into spaces nothing else will fit into. The brass used for the head of the nut is soft enough to bite into placements, but hard enough to resist deforming and pulling through. Wires are soldered directly into the nut head, allowing a thicker wire to be used and increasing overall strength. The colour coded swage gives easy size selection and allows the Brass Offset to self equalise when loaded, making the most of marginal placements.

The DMM Alpha Sport Quickdraw uses a clip friendly biner that DMM call the Alpha Clip. It has a easy to handle, grippy shape, generous 8.5mm rope radius. The gate itself has a flared out barrel shape and DMM declare this to be the most clip friendly they have ever made. The variable width tape (26mm and it's widest) is easy to grab and comfortable when pulling back up the route after a fall.

The DMM Alpha Steel Quickdraw is the best handling gym draw on the market, forging the ergonomic Alpha shape in steel. The ergonomic Alpha shape combines with a curved gate to make clipping easy. Once the rope is clipped, deep rope baskets help ensure the carabiner is correctly oriented.

The DMM Alpha Sport Quickdraws (6 Pack) are highly tough and durable quickdraws that are comfortable and easy to use, so you'll never want to stop climbing! With a solid gate carabiner for the bolt end, and a bent gate carabiner for the rope end, the Alpha delivers unparalleled handling with super easy clipping.

The DMM Dynatec 11mm Quickdraw Tapes are individual quickdraw extenders that can be used in between two karabiners to make a quickdraw. One end of the tape has a sewn-in 'tadpole' retainer of rubber which a karabiner can thread through and then clip onto the rope, making the karabiner less likely to spin or become cross-loaded by the rope in the event of a fall. The longer lengths are useful for trad climbing, particularly single rope use as there is less chance of rope drag and movement lifting out placed protection.