Climbing

The Petzl Laser Speed Ice Screws are ultra-high-performance ice screws with integrated cranks. They provide ultra-high-performance in any type of ice. The shape of the tri-toothed drill improves the bite of the ice screw. The lighter steel tube is strong yet lightweight. The integrated folding crank gives an optimized lever, making it easier and faster to screw in. Color-coding helps identify the length of a screw.

The Petzl Kliff can hold up to 100m of rope as well as the rest of your sport climbing gear. It's practical and easy to use with the large main zipper opening, allowing for quick access to all your gear when the bag is lying on the ground. The detachable integrated tarp measures 140 x 140 cm and has 4 corner handles.

The Petzl Reverso is a versatile and lightweight belay/rappel device designed for use with one or two rope strands and the ability to belay a second climber from the anchor. The specific design allows the rope to glide smoothly through the device and reduces wear. It is compatible with most rope diameters: single 8.5 to 10.5 mm, half 7.1 to 9.2 mm, and twin 6.9 to 9.2 mm.

The Petzl Quark is a multipurpose ice axe, designed primarily for technical mountaineering and for ice climbing. The Quark can adapt to any situation thanks to its modular construction. The Quark is easy to use, its balance and its Ice pick allow solid placements on any type of ice. Thanks to the clearance under the head and to the shape of the pick hooking is more efficient. The Griprest and the Trigrest hand rest ensure a comfortable but powerful grip.

The Petzl Picchu is a children's helmet designed for young climbers and cyclists. It has a thick exterior shell that resists impacts and scratches. The design provides greater coverage for protection against lateral, frontal and rear impact. The Picchu Helmet is ventilated and specifically designed for little adventurers, making it comfortable to wear.

The Petzl string has two main functions: holding the rope end carabiner in place on a quickdraw or sling, and protecting a relatively high-wear area of a sling from abrasion. Either way this will increase the durability of your equipment. Made from rubber.

If you're a climber or a mountaineer and you're looking for an ultra-lightweight helmet that's extremely durable, the Petzl Sirocco is the helmet for you. It's been designed specifically to protect the entire head, which is achieved by being built lower down in the rear, ensuring maximum head coverage. Combine this with superb head ventilation and you're virtually guaranteed a comfortable fit.

The Petzl Saka chalk bag’s ergonomic shape allows easy access to the chalk. The soft fabric won’t cause discomfort when wearing a pack or when your back is against a rock wall. Practical closure system with drawstring and cordlock. It can be opened with only one hand should you forget to open it before you start climbing.

The Petzl Summit Evo is a technical performance ice axe for classic mountaineering. Designed for classic mountaineering, the Summit Evo ice axe is the tool of choice for all types of alpine trips. Lightweight and with a waterjet-formed tube, it offers a very comfortable grip under the head of the axe. The technical design of the curved shaft provides the necessary clearance on steep, icy terrain.

The Raumer Wing Hanger with Ring is bent at 40° to allow easier clipping.  The stainless steel AISI 316L round ring is 10mm in diameter. The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility. The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!

The shank is knurled; this method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.

The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope. Matt grey to minimise environmental and visual impact.

The Raumer Hang Fix expansion bolts are high-performance climbing anchors designed to provide strong grip and reliability on hard rock surfaces like limestone and dolomite. Their advanced expanding collar ensures a secure hold, even on slightly weathered rock. Made from durable AISI 316L stainless steel, they provide excellent corrosion resistance for long-term use. Ideal for climbers seeking safe, dependable gear in tough environments.

A classic belay station seen at the top of many climbing routes. Made in Italy from AISI 316L Stainless Steel, this station will proves to be invaluable. To meet the requirements of the EN 959 the plate is to be used with its Hang Fix. We recommend the use of our Hang Fix stainless steel M10L (Art.157).