Radius P Anchor

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope. Matt grey to minimise environmental and visual impact.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.

The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.

The Raumer Wing Hanger with Ring is bent at 40° to allow easier clipping.  The stainless steel AISI 316L round ring is 10mm in diameter. The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility. The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!

The shank is knurled; this method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.