Products tagged with 'raumer'

The Raumer Round Stainless Steel Ring's surface allows for easy insertion of the rope and exerts the minimum damage to the sheath. As the pressure is spread over the full 360°, the wear on the ring is almost non-existent.  Also used to equip improvised abseil stations using cordage and a bolt-chain-carabiner combination.

The newest iteration of the Raumer Minox hanger is lighter, and has a larger hole for accommodating carabiners and attachments, all while maintaining the previous breaking strength. The polished finish allows for easy removal of mud and dirt (specific for caving), differentiating itself from matt grey hangers needed to mitigate visual pollution in outdoor areas.

The Raumer Wing Hanger with Ring is bent at 40° to allow easier clipping.  The stainless steel AISI 316L round ring is 10mm in diameter. The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility. The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!

The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope. Matt grey to minimise environmental and visual impact.

The Raumer Hang Fix expansion bolts are high-performance climbing anchors designed to provide strong grip and reliability on hard rock surfaces like limestone and dolomite. Their advanced expanding collar ensures a secure hold, even on slightly weathered rock. Made from durable AISI 316L stainless steel, they provide excellent corrosion resistance for long-term use. Ideal for climbers seeking safe, dependable gear in tough environments.

A classic belay station seen at the top of many climbing routes. Made in Italy from AISI 316L Stainless Steel, this station will proves to be invaluable. To meet the requirements of the EN 959 the plate is to be used with its Hang Fix. We recommend the use of our Hang Fix stainless steel M10L (Art.157).