The Petzl Picchu is a children's helmet designed for young climbers and cyclists. It has a thick exterior shell that resists impacts and scratches. The design provides greater coverage for protection against lateral, frontal and rear impact. The Picchu Helmet is ventilated and specifically designed for little adventurers, making it comfortable to wear.

The Petzl Saka chalk bag’s ergonomic shape allows easy access to the chalk. The soft fabric won’t cause discomfort when wearing a pack or when your back is against a rock wall. Practical closure system with drawstring and cordlock. It can be opened with only one hand should you forget to open it before you start climbing.

If you're a climber or a mountaineer and you're looking for an ultra-lightweight helmet that's extremely durable, the Petzl Sirocco is the helmet for you. It's been designed specifically to protect the entire head, which is achieved by being built lower down in the rear, ensuring maximum head coverage. Combine this with superb head ventilation and you're virtually guaranteed a comfortable fit.

The Petzl string has two main functions: holding the rope end carabiner in place on a quickdraw or sling, and protecting a relatively high-wear area of a sling from abrasion. Either way this will increase the durability of your equipment. Made from rubber.

The Petzl Summit Evo is a technical performance ice axe for classic mountaineering. Designed for classic mountaineering, the Summit Evo ice axe is the tool of choice for all types of alpine trips. Lightweight and with a waterjet-formed tube, it offers a very comfortable grip under the head of the axe. The technical design of the curved shaft provides the necessary clearance on steep, icy terrain.

The Raumer Hang Fix expansion bolts are high-performance climbing anchors designed to provide strong grip and reliability on hard rock surfaces like limestone and dolomite. Their advanced expanding collar ensures a secure hold, even on slightly weathered rock. Made from durable AISI 316L stainless steel, they provide excellent corrosion resistance for long-term use. Ideal for climbers seeking safe, dependable gear in tough environments.

The shank is knurled; this method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope. Matt grey to minimise environmental and visual impact.

The Raumer Wing Hanger with Ring is bent at 40° to allow easier clipping.  The stainless steel AISI 316L round ring is 10mm in diameter. The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility. The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!

The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.

A classic belay station seen at the top of many climbing routes. Made in Italy from AISI 316L Stainless Steel, this station will proves to be invaluable. To meet the requirements of the EN 959 the plate is to be used with its Hang Fix. We recommend the use of our Hang Fix stainless steel M10L (Art.157).

Rock Technologies Dry 5 Liquid Chalk has over 70% alcohol / ethanol content and therefore can have disinfectant effects. It is manufactured in the UK and is recommended for use on climbing walls and is also a very good idea during and post Covid-19 for outdoor bouldering / short routes.

The Salewa Crow GTX Men's is a versatile and lightweight mountaineering shoe. This is an all-round boot that suits a wide variety of uses such as summer mountaineering, technical hikes and via ferrata. They're also crampon compatible, so it can be used on glacier hikes. The crampon-compatible Vibram® Mulaz soles are ideal for most mountaineering conditions as they are self-cleaning and grippy, offering traction in mixed terrain. The Crow GTX integrates the Salewa 3F System for firm ankle and heel support,  as well as the climbing system to ensure that it fits perfectly around your foot and Flex Collar for comfort during descents.

Salewa Vultur Vertical GTX Men's are a warm B3 rated boot, ideal for Scottish Winter, Norwegian icefall and hard Alpine climbing. They have a super tough Microfibre upper with an insulated Gore-Tex Duratherm XL lining for totally waterproof and warm comfort. Following on from previous B3 boots, the Salewa UN Vultur Vertical GTX has taken things further with a flex collar to maximise comfort around the lower calf and a multi-layer MFF+ footbed which allows you to fine tune the fit for volume and width in the forefoot.

The Salewa Vultur Evo GTX Women's is a hybrid crampon-compatible, rigid women’s alpine mountaineering boot (stiff end of B2) with a hardwearing Perwanger suede upper and waterproof, breathable GORE-TEX® lining for optimized climate comfort.