Phantom HMS

The DMM 30kN Boa HMS Keylock is the heavier duty version of the 25kN Boa, it is hot forged from 14mm bar which gives it the 30kN major axis rescue that's required for rescue loads. Its ergonomics ensure that it is still easily operated whilst wearing gloves and the curved basket copes with even the busiest rigging set ups, allowing devices to settle comfortably.

The DMM Ceros has been designed to help minimise the risk of cross-loading with its internal wire-gate that will keep the karabiner captive on the belay loop. The wire gate opens onto the belay loop in a single movement, plus the intuitive design ensures it is easy to use and rack - even with one hand. The horn on the spine of the karabiner helps prevent assisted braking devices from jumping onto the spine.

The DMM Rhino karabiner is not restricted to assisted locking belay devices: it works brilliantly with standard devices. The full cross section of the top bar means greater wear resistance, and smooth operation in guide mode usage. The horn makes identification by feel on the rear gear loop easier, and the clean nose design provides snag-free loading and unloading of ropes. The big burly top bar is contrasted by our signature I-Beam construction on the non-rope bearing surfaces resulting in a total weight of 72g.

The DMM Shadow HMS is a large yet lightweight HMS karabiner, designed for efficient belaying, rigging, and ropework. With a wide, deep basket that easily holds up to three clove hitches (<9.5mm rope) and a short gate for maximum opening, it delivers excellent handling and strength in a compact form. Available in Screwgate and multiple locking gate options, it’s an essential choice for climbers and professionals seeking high performance with low weight.

The Mammut Smart HMS 2.0 Screwgate Carabiner offers the same double safety and easy handling as the older version. The screw locking can be operated only when the safety gate is open. Accidental opening is excluded, as well as unintentional twisting of the carabiner in the belay loop of the climbing harness. This prevents dangerous lateral loading. Mammut recommends use of the Smart HMS 2.0 carabiner for the Smart 2.0 belay device.

The OCUN Condor HMS is a large karabiner that responds to the new trends of safety. Equipped with an independent internal wire gate that prevents it from rotating and guards against unwanted release from a belay loop, this karabiner ensures safe belaying and rappelling. The internal gate locks in the right direction and therefore prevents upward release. This means that the belayer can focus their full attention on the climber. The Condor brings a new level of safety into belaying.

The Petzl Attache is a lightweight and compact, pear-shaped karabiner with as screw gate opening. It has multiple uses for belaying, such as connecting a belay system to a harness and belaying with a Munter hitch. It has a H-cross section to reduce weight, as well as the keylock system to avoid the karabiner snagging during manoeuvres.

The Petzl William is a large carabiner can be useful in many places. This William's shape and size means it's useful for belaying and abseiling with an Italian hitch with both single or double ropes, anchoring multiple ropes and slings and keeping the belay station organized.