William

The Beal Be Lock is a large HMS carabiner designed for easy use with double (halves and twins) rope systems. The large surface area provides easy control in all weather. The Be Lock is particularly suitable for HMS belays and double rope manoeuvres, such as capstan or half-capstan.

The Beal Be Safe is a HMS screwlock karabiner that's perfect for use with belay devices as it can accommodate two ropes at once, without the risk of them becoming overlapped in the event of a fall. The reception cradle ensures that the two ropes slide together and does not generate friction on the sides of the carabiner when the rope is braked. This is true whether rappelling or stopping a fall.

The DMM 30kN Boa HMS Keylock is the heavier duty version of the 25kN Boa, it is hot forged from 14mm bar which gives it the 30kN major axis rescue that's required for rescue loads. Its ergonomics ensure that it is still easily operated whilst wearing gloves and the curved basket copes with even the busiest rigging set ups, allowing devices to settle comfortably.

The DMM Ceros has been designed to help minimise the risk of cross-loading with its internal wire-gate that will keep the karabiner captive on the belay loop. The wire gate opens onto the belay loop in a single movement, plus the intuitive design ensures it is easy to use and rack - even with one hand. The horn on the spine of the karabiner helps prevent assisted braking devices from jumping onto the spine.

The DMM Phantom HMS is an extremely compact and lightweight, yet strong karabiner with an optimised rope bearing surface that's ideally suited for belaying and rigging. The extra-short gate and slim tapering nose can easily take clove hitches and clipping slings.

The DMM Rhino karabiner is not restricted to assisted locking belay devices: it works brilliantly with standard devices. The full cross section of the top bar means greater wear resistance, and smooth operation in guide mode usage. The horn makes identification by feel on the rear gear loop easier, and the clean nose design provides snag-free loading and unloading of ropes. The big burly top bar is contrasted by our signature I-Beam construction on the non-rope bearing surfaces resulting in a total weight of 72g.

The DMM Shadow HMS is a large yet lightweight HMS karabiner, designed for efficient belaying, rigging, and ropework. With a wide, deep basket that easily holds up to three clove hitches (<9.5mm rope) and a short gate for maximum opening, it delivers excellent handling and strength in a compact form. Available in Screwgate and multiple locking gate options, it’s an essential choice for climbers and professionals seeking high performance with low weight.

The OCUN Condor HMS is a large karabiner that responds to the new trends of safety. Equipped with an independent internal wire gate that prevents it from rotating and guards against unwanted release from a belay loop, this karabiner ensures safe belaying and rappelling. The internal gate locks in the right direction and therefore prevents upward release. This means that the belayer can focus their full attention on the climber. The Condor brings a new level of safety into belaying.