Tanga

Maillon Rapides have a working load limit that is a fifth of the breaking load of the maillon (as stated by the manufacturer) and will become damaged and distorted if they are used above this load limit. Some are certified as PPE (to protect falls from height) and some are not. If you are unsure of which is which, either ask us, or have a look at your maillon which will be marked with "PPE" if it is and "CE" if it is not. CE maillons conform to Maillon Rapide's standards but are not certified as PPE.

The Petzl Captiv positioning bar promotes loading of the carabiner on the major axis, limits the risk of rotation and keeps it integrated with the device or lanyard. Captiv is compatible with OK, Am’D, William, Oxan, Bm'D carabiners and the Rollclip A pulley carabiner.

The Petzl MGO Open is a wide opening connecter for securing to larger diameter bars and cables. The auto locking mechanism makes using the MGO Open easy and convenient when crossing between structures and fixed attachments.

The DMM Belay Master Clip can be used in conjunction with many DMM karabiners (that can be bought in store), this device locks in place the karabiner, to prevent cross loading. It holds the karabiner and belay device in the correct alignment with the harness. This clip can only be locked if the screwgate has been properly closed, being another safety advantage. This small item will aid to make sure you never do your belay wrong!

The Petzl Captiv Adjust is a karabiner positioning bar combined with an Adjust rope adjuster. This positioning bar promotes loading of the karabiner on the major axis and helps hold the Adjust rope adjuster in the proper position to reduce the risk of accidental release. It helps keep the lanyard and rope adjuster integrated with the karabiner, reducing the risk of losing them. The Captiv Adjust is compatible with the OK, Am'D, Bm'D and Oxan karabiners.

The Petzl Captivo is a positioning bar for the Vertigo Twist-Lock connector. It secures the connector to the lanyard, promotes loading of the connector on the major axis and limits the risk of it flipping. The Captivo is only compatible with the Vertigo Twist-Lock connector.

The Beal Pinch has been designed to help secure a karabiner in position at the end or a rope or tape lanyard, and constructed of tough, abrasion resistant material to provide protection against rock and concrete.