Captiv

The Beal Flat Link has been designed to go with the Hold Up harness and is a fully rated karabiner, making it ideal for full body harnesses. The flat surfaces ensure an even load distribution on webbing.

Transparent Tool Bag- often used as Industrial Equipment. Perfect because you can see what tools you have in the bag. Can be attached using two clips at top.

The DMM Belay Master Clip can be used in conjunction with many DMM karabiners (that can be bought in store), this device locks in place the karabiner, to prevent cross loading. It holds the karabiner and belay device in the correct alignment with the harness. This clip can only be locked if the screwgate has been properly closed, being another safety advantage. This small item will aid to make sure you never do your belay wrong!

The Petzl Captiv Adjust is a karabiner positioning bar combined with an Adjust rope adjuster. This positioning bar promotes loading of the karabiner on the major axis and helps hold the Adjust rope adjuster in the proper position to reduce the risk of accidental release. It helps keep the lanyard and rope adjuster integrated with the karabiner, reducing the risk of losing them. The Captiv Adjust is compatible with the OK, Am'D, Bm'D and Oxan karabiners.

The Petzl Captivo is a positioning bar for the Vertigo Twist-Lock connector. It secures the connector to the lanyard, promotes loading of the connector on the major axis and limits the risk of it flipping. The Captivo is only compatible with the Vertigo Twist-Lock connector.

The Petzl Tanga positioning ring helps hold the connector in the correct position.

The Beal Pinch has been designed to help secure a karabiner in position at the end or a rope or tape lanyard, and constructed of tough, abrasion resistant material to provide protection against rock and concrete.