Pulleys

The Beal Transf'air Fixe B is a pulley with fixed side plates and ball bearings for optimal efficiency. Its compact and lightweight nature make it easy to handle. Allows a pulley system to be set up by adding a component such as an ascender.

The Transf'air 1 pulley is a pulley designed for load deflection and hauling. Single pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope. The good performance is ensured by a sheave mounted on a bronze ring. Its durability is reinforced by a stainless steel shaft and washer. And to ensure traceability, each pulley has an individual number.

The Beal Transf'air 1B pulley is designed for load deflection and hauling. Single pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope.

The Beal Transf'air 2B pulley is a pulley designed for load deflection and hauling. Twin pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope.

The Beal Transf'air 2B is a highly efficient double pulley with ball bearing mounted sheaves, the swivelling action of the side plates allows the pulley to be positioned anywhere along the rope. Ideal for intensive use with large diameters ropes.

The Lyon Frixion SRB is a heavy-duty shear reduction block which offers greater friction than a conventional pulley, reducing the risk of uncontrolled descents. It is ideal for use in high ropes courses, climbing walls and for top rope belaying.

ISC lightweight Eiger Pulleys are made from high strength Aluminium and fitted with tamper-proof rivets.

The Jag is a double rope pulley used to reduce friction in the system making hauling more efficient. It can be paired with other pulleys to provide mechanical advantage, or with the Jag Traxion to create a progress capture 4:1 system.

The Jag Traxion is a progress capture double rope pulley that can be used in haul systems to provide mechanical advantage. Petzl have designed this Traxion specifically to work alongside the Jag double rope pulley so a 4:1 haul system can be created. Sealed ball bearing massively reduce friction, reducing the effort required when moving a load.

The Petzl Mobile is a compact and lightweight pulley for hauling systems and deviations. To increase efficiency the sheave is mounted on a self-lubricating bushing.

The ISC Fixed Wheel Single Prussik Pulley is a medium single prussik pulley with a fixed wheel in stainless steel. Can be used as a shear reduction pulley – Now CE Approved.

The ISC ZipSpeed-S Trolley is an affordable pulley with a mid-sized trolley that uses state of the art engineering techniques to ensure that the trolley will run and run! These Tandems are fitted with rubber sealed, deep groove bearings for optimal performance and a lifespan of several thousand miles/km. The side plates are made from Aerospace Grade 7075 Aluminium, to minimise flex.

Everyone's favourite Pulley! The DMM Hitch Climber Triple Attachment Pulley forms an integral part of the renowned Hitch Climber System and is a firm favourite of working at height professionals the world over. The three hole construction makes rigging and organising much simpler and allows for off-centre hanging to minimise rope to pulley friction.

With hardly a straight line in sight, the hot forged curves and fairlead flares of DMM's Pinto Pulley make for an ultra efficient, ‘textile friendly’ environment. Clip, hitch, splice or thread the anchor holes or the becket to give numerous work and rescue configurations (textile attachments can help minimise any torsional build up in closed systems).

The DMM Pinto Spacer is an essential component for Pinto Pulley applications where textile connecting elements tend to compress the side plates.

Slightly larger than the Pinto and accommodating a larger rope size, the DMM Pinto Rig also has a high efficiency roller bearing giving ultra smooth operation. With hardly a straight line in sight, the hot forged curves make for a ‘textile friendly’ environment.