Sport

This variable width nylon dogbone is great for making up sport quickdraws, or replacing them at activity/climbing centres. The sling tapers to 16mm at each end to hold the carabiners in the correct orientation, and has a rubber keeper to keep the rope end biner from cross loading. The middle of the sling is a comfortable 26mm in case you need to dog up a route. We sell 12cm, and 18cm length options incase you need an extended quickdraw.

The DMM Zenith is a small climbing rucksack that's ideal for long multi-pitch routes. It has a smooth profile which doesn't hinder access to items on your harness whilst climbing and is less likely to snag during descents compared with other, more bulky packs. The zipped panel and bucket style opening limits spillage and allows easy access. The Zenith can be clipped into the anchor and get to your refreshments or guidebook etc with ease.

The Fixe Stainless Steel Hanger is made from either Ecotri Zinc-plated Steel for indoor use or 316L Stainless Steel for outdoor use. Both of which make for a super-strong optimised hanger for building anchors, ensuring full contact and constant pressure when fitting to reduce the chances of it moving.

The Mammut Smart 2.0 is a reliable and intuitive belay device with a newly developed brake insert that blocks the rope in the event of a fall. This new version of the Smart belay device offers significantly improved braking effectiveness as well as optimized geometry and intuitive handling.

The Petzl Coeur Bolt is a multi-directional hanger (with bolt) designed for use in sport climbing, multi-pitch climbing and is also good for canyoning.  It is manufactured in three materials; Steel, Stainless Steel (316L) and HCR (High Corrosion Resistant) Stainless Steel (904).  The steel and stainless steel hangers are both available in 10mm or 12mm hole diameters.

The Petzl Coeur is a multi-directional bolt hanger designed for use in sport climbing, multi-pitch climbing and is also good for canyoning.  It is manufactured in three materials; Steel, Stainless Steel (316L) and HCR (High Corrosion Resistant) Stainless Steel (904).  The steel and stainless steel hangers are both available in 10mm or 12mm hole diameters.

Expansion bolt for prospecting new routes and maintaining current routes.

The Petzl Axess Sling connects two carabiners together to make a quick-draw. Made of thick, durable material, the Express Sling is comfortable and easy to grab when on the wall, as many other quick-draws are narrower making them harder to grab and pull on.

The Petzl Kliff can hold up to 100m of rope as well as the rest of your sport climbing gear. It's practical and easy to use with the large main zipper opening, allowing for quick access to all your gear when the bag is lying on the ground. The detachable integrated tarp measures 140 x 140 cm and has 4 corner handles.

The Raumer Wing Hanger with Ring is bent at 40° to allow easier clipping.  The stainless steel AISI 316L round ring is 10mm in diameter. The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility. The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!

The shank is knurled; this method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.

The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope. Matt grey to minimise environmental and visual impact.

The Raumer Hang Fix expansion bolts are high-performance climbing anchors designed to provide strong grip and reliability on hard rock surfaces like limestone and dolomite. Their advanced expanding collar ensures a secure hold, even on slightly weathered rock. Made from durable AISI 316L stainless steel, they provide excellent corrosion resistance for long-term use. Ideal for climbers seeking safe, dependable gear in tough environments.

A classic belay station seen at the top of many climbing routes. Made in Italy from AISI 316L Stainless Steel, this station will proves to be invaluable. To meet the requirements of the EN 959 the plate is to be used with its Hang Fix. We recommend the use of our Hang Fix stainless steel M10L (Art.157).