Climbing

The DMM Offset Nuts are made with anodised alloy and are available individually as a size 7-11 set. These are bigger and more rounded than their brass brothers. Based on the famed HB design this anodised alloy offset set gets you placement where no other nut can because of their complex offset shape. Especially useful on granite cracks and colour coded for easy selection off the harness.

This variable width nylon dogbone is great for making up sport quickdraws, or replacing them at activity/climbing centres. The sling tapers to 16mm at each end to hold the carabiners in the correct orientation, and has a rubber keeper to keep the rope end biner from cross loading. The middle of the sling is a comfortable 26mm in case you need to dog up a route. We sell 12cm, and 18cm length options incase you need an extended quickdraw.

The DMM Nylon 26mm Open Slings are very strong and durable nylon slings ideal for centre use. These are the strongest tape in DMM's range, rated at a massive 32kN. When strength and longevity are paramount these are the ones.

The DMM Nylon 16mm Open Slings are wider and heavier than the Dynatec slings and are a great option for beginners or use in outdoor activity centres. Although they are rated no higher than dyneema slings, there is more material involved and so they offer a greater safety margin when dragged over a sharp edge. The extra width may give beginners more confidence too.

The DMM Nutbuster is an invaluable tool for retrieving jammed gear. It features a rubber handle that gives a firm grip that lets you bash the Nutbuster to remove stuck protection. It can also be removed to reveal a 17mm spanner that lets you tighten loose bolts. The Nutbuster is laser cut from stainless steel for strength and corrosion resistance, with holes cut into it to minimise weight. A versatile and functional tool that every trad climber should carry.

The DMM Micro Wallnuts are for use in extremely narrow cracks where a normal Wallnut size 1 is too big. The large contact surface area of the Micro Wallnuts allows them to spread loads over a greater area of rock, decreasing the chance of the rock failing. They feature straight sides to give alternative placement options to our other alloy micro-protection. Used in conjunction with Peenuts they provide comprehensive protection for small cracks in friable rock.

The DMM IMP Brass Nuts are invaluable for those pushing into harder grades and need to take advantage of all protection options. The brass alloy used in their construction means that the nuts lock into the rock incredibly well, whilst also resisting being pulled through the placement. These are soldered directly on to wires, allowing a thicker wire to be used and increasing the strength of the IMP. The swage on the wire is colour coded for quick size selection, and allows one side of the wire to slide, letting the IMP self equalize when loaded and increasing placement security.

The DMM Renegade is a comfortable climbing harness that's been built to last, whether you're climbing trad, sport or alpine, the Renegade fits the bill. It features a floating waist belt which allows you to adjust the harness to a central position, even when wearing heavy layers. There's also internal lumbar support throughout the belt, which helps spread the load, provides support and adds additional comfort.

The DMM Trad Chalk Bag is DMM's biggest routing chalk bag designed for climbers with big hands, for long routes and those who like to chalk up to the wrist.

The DMM Traction Chalk Bag is ideally sized for trad and sport climbing and will accept a chalk ball as well as working great with loose chalk and block chalk. The stiffened, contoured top opening means the bag is always ready for access and guides your hand in swiftly for those urgent dips when the pump is starting to take hold.

The DMM Torque Nuts are designed to work in a similar fashion to Rockcentrics meaning they can be placed passively at a constriction or cammed into place in parallel cracks thanks to their offset edges. Additionally they are racked on extendable dyneema allowing the nuts to be neatly stowed on your harness and then extended when placed, eliminating then need for extra quickdraws. Four sizes are available covering a very wide range of large cracks.

The DMM Spectre Quickdraw is a great choice for climbers looking to build their first rack. It uses two full-sized karabiners for ease of handling, with a small gate notch for reduced snagging and I-Beam construction to reduce weight. The karabiners are linked by a lightweight 11mm Dynatec Dyneema sling, making this the perfect starter quickdraw that's suitable for all styles of climbing.

The DMM Spectre Quickdraw is a great choice for climbers looking to build their first rack. It uses two full-sized karabiners for ease of handling, with a small gate notch for reduced snagging and I-Beam construction to reduce weight. The karabiners are linked by a lightweight 11mm Dynatec Dyneema sling, making this the perfect starter quickdraw that's suitable for all styles of climbing.

The DMM XSRE karabiners are compact and lightweight climbing accessories that haven been designed to provide maximum functionality without compromising on strength. With its sleek design and reliable performance, this karabiner is an excellent choice for climbers who prioritise weight savings and efficiency.

The Edelrid Aramid Cord Sling 6mm is a sewn sling made with high-strength aramid. Aramid delivers a significantly higher breaking strength than other conventional slings.

The Edelrid Finn III is a fully-adjustable children's climbing harness that not only looks cool but is also safe and sustainably manufactured. It features 3D mesh padding on the waist for comfort and the leg loops are highly adjustable to accommodate for tiny sizes! The Finn was specifically designed to be used by kids but does not compromise on performance! It is tailored to the same standards as Edelrid's adult harnesses.