Blue Ice
Cuesta Harness
The Blue Ice Cuesta Harness is a multipurpose rock-climbing harness dedicated to confirmed and committed climbers. The sleek, slim design with laminated waist belt and elasticised leg loops offers complete freedom of movement with a minimal weight (285g). Its tie-in points are reinforced with high tenacity nylon sheet to ensure a really high durability of the harness.
DMM
Puma 2
The Puma 2 is DMM's top of the range female-specific harness. This updated version has taken all of it's predecessors attributes and made them even better. The free-floating waist belt guarantees a good fit, whether you're at the top or bottom end of the size range (or if you need to add a few layers in the winter), you can be assured that your belay loop will always be central and the 7 gear loops (5 on XS and Small) are easily in reach.
DMM
Brass Offset
The DMM Brass Offsets are a crucial tool for protecting small flared cracks, they often fit perfectly into spaces nothing else will fit into. The brass used for the head of the nut is soft enough to bite into placements, but hard enough to resist deforming and pulling through. Wires are soldered directly into the nut head, allowing a thicker wire to be used and increasing overall strength. The colour coded swage gives easy size selection and allows the Brass Offset to self equalise when loaded, making the most of marginal placements.
DMM
Dynatec 11mm Quickdraw Tape
The DMM Dynatec 11mm Quickdraw Tapes are individual quickdraw extenders that can be used in between two karabiners to make a quickdraw. One end of the tape has a sewn-in 'tadpole' retainer of rubber which a karabiner can thread through and then clip onto the rope, making the karabiner less likely to spin or become cross-loaded by the rope in the event of a fall. The longer lengths are useful for trad climbing, particularly single rope use as there is less chance of rope drag and movement lifting out placed protection.
DMM
Halfnut
The DMM Halfnuts excel in shallow placements, pin scars and situations where every gram counts. If they look familiar it’s because they have the same tapered faces and side profile as DMM’s tried and tested Wallnuts. The combined weight of the 1-11 Halfnut sets are 42% lighter than the equivalent Wallnuts and they are similarly colour coded.
DMM
Nutbuster
The DMM Nutbuster is an invaluable tool for retrieving jammed gear. It features a rubber handle that gives a firm grip that lets you bash the Nutbuster to remove stuck protection. It can also be removed to reveal a 17mm spanner that lets you tighten loose bolts. The Nutbuster is laser cut from stainless steel for strength and corrosion resistance, with holes cut into it to minimise weight. A versatile and functional tool that every trad climber should carry.
Discount Codes
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.