DMM

The DMM IMP Brass Nuts are invaluable for those pushing into harder grades and need to take advantage of all protection options. The brass alloy used in their construction means that the nuts lock into the rock incredibly well, whilst also resisting being pulled through the placement. These are soldered directly on to wires, allowing a thicker wire to be used and increasing the strength of the IMP. The swage on the wire is colour coded for quick size selection, and allows one side of the wire to slide, letting the IMP self equalize when loaded and increasing placement security.

The DMM Renegade is a comfortable climbing harness that's been built to last, whether you're climbing trad, sport or alpine, the Renegade fits the bill. It features a floating waist belt which allows you to adjust the harness to a central position, even when wearing heavy layers. There's also internal lumbar support throughout the belt, which helps spread the load, provides support and adds additional comfort.

The DMM Trad Chalk Bag is DMM's biggest routing chalk bag designed for climbers with big hands, for long routes and those who like to chalk up to the wrist.

The DMM Traction Chalk Bag is ideally sized for trad and sport climbing and will accept a chalk ball as well as working great with loose chalk and block chalk. The stiffened, contoured top opening means the bag is always ready for access and guides your hand in swiftly for those urgent dips when the pump is starting to take hold.

The DMM Torque Nuts are designed to work in a similar fashion to Rockcentrics meaning they can be placed passively at a constriction or cammed into place in parallel cracks thanks to their offset edges. Additionally they are racked on extendable dyneema allowing the nuts to be neatly stowed on your harness and then extended when placed, eliminating then need for extra quickdraws. Four sizes are available covering a very wide range of large cracks.

The DMM Spectre Quickdraw is a great choice for climbers looking to build their first rack. It uses two full-sized karabiners for ease of handling, with a small gate notch for reduced snagging and I-Beam construction to reduce weight. The karabiners are linked by a lightweight 11mm Dynatec Dyneema sling, making this the perfect starter quickdraw that's suitable for all styles of climbing.

The DMM Spectre Quickdraw is a great choice for climbers looking to build their first rack. It uses two full-sized karabiners for ease of handling, with a small gate notch for reduced snagging and I-Beam construction to reduce weight. The karabiners are linked by a lightweight 11mm Dynatec Dyneema sling, making this the perfect starter quickdraw that's suitable for all styles of climbing.

The DMM Zenith is a small climbing rucksack that's ideal for long multi-pitch routes. It has a smooth profile which doesn't hinder access to items on your harness whilst climbing and is less likely to snag during descents compared with other, more bulky packs. The zipped panel and bucket style opening limits spillage and allows easy access. The Zenith can be clipped into the anchor and get to your refreshments or guidebook etc with ease.

The DMM XSRE karabiners are compact and lightweight climbing accessories that haven been designed to provide maximum functionality without compromising on strength. With its sleek design and reliable performance, this karabiner is an excellent choice for climbers who prioritise weight savings and efficiency.

The DMM Ultra O Screwgate is an extremely symmetrical oval climbing carabiner, ideal for use with assisted belay devices, pulleys, swivels and shackles. Some oval carabiners are not as symmetrical as others, making them less useful for their designed purpose. The DMM Ultra O Coloured 3-Pack includes three different colours of the Ultra O screwgate carabiners.

The DMM Shadow Bent Gate is a bent gate aluminium alloy carabiner, perfect for rope side of quickdraws or racking gear. the I beam construction gives full strength but a reduced weight, making the Shadow a lightweight, full-sized carabiner. It also features a snag free keylock nose.

Available as a stand-alone item, the DMM Slide Lock Leash is suitable for axes up to 55cm long. Employing a minimalist design for improved functionality and durability, the Slide Lock Leash is intuitive to use and operable with one hand. Vari-width wrist webbing ensures comfort without unnecessary padding or bulk; minimising water absorption. It replaces DMM's Standard and Choke Hold Leashes for winter walking and mountaineering.

The DMM Brenin Slidelock is an upgraded version of their classic Brenin harness. It has increased durability and safety point colour coding on the clip-in and tie-in points. It also benefits from new Slidelock stainless buckles, vertical tie-in points and belay loop design. With DMM iD as standard.

The DMM Phantom Alpine Quickdraw 60cm is an excellent, high performance trad onsight quickdraw, with two lightweight Phantom wiregates.

The DMM Shadow Straight Gate is a lighter-weight, yet still large enough carabiner that it can be used as a crossover for both sport and trad quickdraws. Where the Shadow would rest on a bolt, the metal has been reinforced to provide durability, and a clean nose reduces snagging when clipping and stripping routes. The gate has chamfered sides to make gripping it with the thumb easier, and the size makes for easier clipping in comparison to the much smaller lightweight carabiners.

In winter, there are times when the only thing to lodge an anchor in is the snow itself. The DMM Deadman lets you make the most of this medium and improves on the classic ice axe belay by creating a larger surface area that increases resistance to the placement pulling through. Used in snow gullies and below cornice top outs, the Deadman creates protection out of nothing and provides security in the most insecure places.

The ProPad+ is a heavy duty rope protector that is suited to the demands of the outdoor activity industry. Thick natural fibre matting protects ropes against sharp edges typically found at the top of crags, railway bridges, and other sites suitable for abseiling and top-roping. A replaceable wear pad increases the ProPad+’s longevity, and helps it withstand the heavy use of large group sessions.

The DMM ProPad+ Wearsheet is a replacement sheet for the DMM Edge Mat. Suited to the demands of modern adventurers in the outdoor industry, the ProPad+ Wearsheet is a thick fibre mat that protects rope from sharp edges at the top of crags for top rope climbing or when anchor building for abseiling and rappelling. Replacing the Wear Pad will increase the overall longevity of the product and should be replaced when the previous sheet has worn through.

The DMM Liquid Chalk is ideal for ascending longer routes or tough boulder problems. Liquid chalk dries to give a resistant and effective layer that absorbs sweat to help give you more grip. Top up the layer with traditional dry chalk to help prolong the usage of both.

The DMM Protection Pack 3 is a great starter pack for anyone looking to get into trad climbing or just to top up their Up and Under Trad Pack! This set from DMM makes the perfect starting point for building a comprehensive climbing rack.

The DMM Protection Pack 1 is a great starter pack for anyone who wants to get into trad climbing or just as a top up to the Up and Under Trad Pack, see below on page.

The DMM Protection Pack 2 comprises of the Wallnut Set (1-11) and the Torque Nut Set (1-4), combined with free UK postage for awesome savings! These passive protection sets make for the perfect starting point for building a comprehensive climbing rack.

The DMM Grippy tape allows the user to customise the grip on ice tools. Can also be used to replace worn out or damaged hand grips. To use simply remove the backing tape and apply tightly around the shaft or handle; keeping the tape taut but not too stretched.

Designed for use in rope access, the DMM Edge Hog fits through deck grating (commonly known as Kennedy Grating) which is found in many industrial situations such as oil rigs, chemical plants and refineries.

The DMM Chalk Bag is loose chalk that gives a good all over covering, effectively drying your hands and keeping them on the holds. The Crushed Chalk Bag is perfect for topping up chalk bags, filling boulder buckets, and replenishing our Chalk Tub.

Enjoy the benefits and freedom of leashless climbing without the risk of losing your tools with the DMM Freedom leash. Perfect for both beginner and advanced climbers tackling long committing routes and all round winter climbing.

Everyone's favourite Pulley! The DMM Hitch Climber Triple Attachment Pulley forms an integral part of the renowned Hitch Climber System and is a firm favourite of working at height professionals the world over. The three hole construction makes rigging and organising much simpler and allows for off-centre hanging to minimise rope to pulley friction.

With hardly a straight line in sight, the hot forged curves and fairlead flares of DMM's Pinto Pulley make for an ultra efficient, ‘textile friendly’ environment. Clip, hitch, splice or thread the anchor holes or the becket to give numerous work and rescue configurations (textile attachments can help minimise any torsional build up in closed systems).

The DMM Pinto Spacer is an essential component for Pinto Pulley applications where textile connecting elements tend to compress the side plates.

Slightly larger than the Pinto and accommodating a larger rope size, the DMM Pinto Rig also has a high efficiency roller bearing giving ultra smooth operation. With hardly a straight line in sight, the hot forged curves make for a ‘textile friendly’ environment.

The DMM Pinto Rig Spacer is an essential component for Pinto Rig applications where textile connecting elements tend to compress the side plates.

The DMM Belay Master Clip is a spare locking insert that helps keep your karabiner in the safest orientation while belaying. Designed to prevent cross-loading and only close when the karabiner is locked, it's a small but powerful safety feature for climbers of all levels.